Logset TH95

Largest and strongest head designed for track based machines

Product content

Logset TH95

Logset TH95 is the largest head in the TH series. It is a genuinely heavy-duty harvester head for ­harvesting and processing large volumes. Its compact structure and versatility make it suitable for many kinds of logging operations.


Logset TH95 is primarily designed for use with ­track-based machines with high lifting ­capacity and slewing power. Its strong chassis, tilt and ­rotator easily absorb the extreme stresses ­produced by these machines.


The chassis and delimbing knives create ­minimal friction against the tree stem. The ­reduced stress during feeding means that the fuel ­consumption is low and the engine and ­hydraulic components have a longer lifespan. The ­geometry of the ­feeding arms and delimbing knives is optimized for large and heavy timber. This guarantees efficient feeding of even bent and heavily branched trees.


Logset TH95 works seamlessly with the TOC-MD 2 ­measuring device. This union of strength and ­intelligence provides reliable measurements, easy adjustments and unbeatable productivity.


Logset is simply better, designed for your ­success.

Technical data

Dimensions

 
Width, head open, mm 2040 (80 in)
Width, head closed, mm 1640 (65 in)
Height to top knife, mm 2070 (81 in)
Height with rotator and link, mm 2700 (106 in)
Weight with rotator and link, kg 2900 (6390 lbs)

Felling/Cutting

 
Max. felling/cutting diameter, mm 900 (35 in)
Saw bar, mm 1000 (39 in)
Saw unit SuperCut 300
Saw motor Parker F12-40
Saw chain tensioning Hydraulic
Chain oil tank volume, liter 18 (5 gal)

Hydraulic system

 
Max. felling/cutting diameter, mm 280 (4061 psi)
Flow required for optional prod. l/min 300 (79 gal/min)
Valve block: purpose built hydraulic manifold  

Feeding

 
Hydraulic motors, feeding arms, cm³ 1120
Hydraulic motors, chassis, cm³ 500
Number of hydraulic motors, pcs 4
Feeding speed (300 l/min, 79 gal/min), m/s 3,9 (13 ft/s)
Max opening, feed wheels, mm 880 (35 in)

Delimbling

 
Max. opening, upper knives, mm 1040 (41 in)
Delimbing diameter tip to tip, mm 620 (24 in)
Number of static knives, pcs 2
Number of movable knives, pcs 4

Rotator

 
Indexator IR12  

Measuring system

 
Logset TOC-MD  

Recommended base machine size

 
Tracked base, from 30 t. (66 000 lbs)

Optional equipments

 
Contact your local dealer for more information about options  
Images

Mallit